![2012 apple mac pro server 2.4 2012 apple mac pro server 2.4](https://cdn.wccftech.com/wp-content/uploads/2013/12/mn5.jpg)
Nehalem was the next step beyond the Penryn Core architecture used in Harpertown, and Bloomfield (a.k.a. Only the entry-level 2008 Mac Pro had one CPU the other versions had two quad-core CPUs for a total of 8 cores. As with Woodcrest, Apple skipped the slower versions of Harpertown (starting at 2.0 GHz) and started at the 2.8 GHz mark, with 3.0 and 3.2 GHz options. The new CPU has a 1600 MHz FSB and two 6 MB L2 caches. Harpertown had been released in November 2007, and the new Mac Pro arrived in February 2008. It was the Early 2008 Mac Pro that moved to a new chip architecture, Harpertown. HarpertownĪlthough Apple had released an 8-core Mac Pro in April 2007, it was based on Woodcrest architecture. (Intel’s Dempsey line of Xeons could draw 95 or even 130 Watts of power, creating a lot more heat.)Īpple ignored the slower 1.6 and 1.83 GHz Woodcrest CPUs in favor of the 2.0, 2.66, and 3.0 GHz ones. The fastest Woodcrest CPU ran at 3.0 GHz and had a power draw of just 80 Watts. The CPU has a 4 MB Level 2 (L2) cache and a 1333 MHz front side bus (FSB) for accessing system memory. Woodcrest was the first server-grade CPU to use Intel’s Core architecture, boosting performance while reducing power consumption. The chip was released in June 2006, and the Mac Pro was announced in August 2006. Xeon CPUs Used in Mac Pros WoodcrestĪll of this is background to the Woodcrest Xeon CPU that was used in the first Mac Pro.
![2012 apple mac pro server 2.4 2012 apple mac pro server 2.4](http://i1.ytimg.com/vi/JcyuhjMS7MI/maxresdefault.jpg)
![2012 apple mac pro server 2.4 2012 apple mac pro server 2.4](https://cdn.macrumors.com/article-new/2015/01/mac_pro_thunderbolt_display.jpg)
Intel fought back with “Paxville”, its first dual-core Xeon CPU, in October 2005 (coincidentally, the same month the last Power Mac G5 models were introduced).
#2012 APPLE MAC PRO SERVER 2.4 MAC OS#
(The PowerPC G5 also had full 32-bit and 64-bit support, but the Mac OS made very little use of its 64-bit capabilities.) Full 64-bit support initially gave AMD a leg up on Intel. It never caught on.)ĬPUs using the x86-64 instruction set can run both legacy 32-bit and 64-bit operating systems and applications. (Intel had been pushing its Itanium architecture, which was fully 64-bit but was not compatible with x86. AMD had defined an extended instruction set to add 64-bit support in 2000, and the first CPU to use it was the April 2003 AMD Opteron. Until this point, Intel’s x86 architecture was 32-bit only. It outperformed the Pentium III Xeon and Athlon MP to become a very popular server CPU. The Xeon made a huge leap forward in 2002, introducing Hyper-Threading to Intel’s server CPU. Unfortunately, the Pentium III Xeon and Pentium 4 both provided more processing power than the “Foster” Xeon CPUs. Intel dropped Pentium from the Xeon brand in 2001 with the release of Xeon CPUs based on the same NetBurst architecture as the Pentium 4. The Pentium II Xeon was replaced by the Pentium III Xeon in 1999. The first Xeon shipped in 1998, based on Pentium II technology and replacing the Pentium Pro, Intel’s previous server CPU. Xeon was Intel’s branding for its line of server CPUs, which are optimized for multiprocessing. Where the Power Mac G5 and iMac G5 used the same CPU (until the Late 2005 introduction of the G5 Dual and G5 Quad), that was never true of the Mac Pro. The Mac Pro line doesn’t use the same consumer CPUs found in other Macs.
![2012 apple mac pro server 2.4 2012 apple mac pro server 2.4](http://www.powerbookmedic.com/views/A1502-internal.jpg)
#2012 APPLE MAC PRO SERVER 2.4 MAC OS X#
The big difference is that there are not a lot of PCIe cards compatible with the Power Mac G5, but there are a lot that are compatible with the Intel-based Mac Pro.įinally, the G5 Quad tops out at Mac OS X 10.5.8 Leopard, while the 2006 Mac Pro officially supports OS X 10.6 Snow Leopard and can be hacked to run OS X 10.7 Lion.įor those looking for a powerful Snow Leopard Mac, which would mostly be because Snow Leopard was the last version of OS X to support PowerPC software such as AppleWorks and older versions of Microsoft Office and Photoshop, the quad-core 2006 Mac Pro is a powerhouse. Where the Power Mac G5 tops out at 16 GB of RAM, the Mac Pro can handle 32 GB.īoth machines have four PCI Express (PCIe) slots, one of which is occupied by a video card. Where the Power Mac G5 had two hard drive bays, the Mac Pro had four. Where the Power Mac G5 had one optical drive bay, the Mac Pro had two. Like the Power Mac G5 Quad, it had two dual-core CPUs, and even the entry-level $2,199 Mac Pro outperformed that G5 Quad. The Mac Pro was the last Mac to make the transition from PowerPC to Intel technology. Whatever was to replace it had to be a real powerhouse – and the first Mac Pro certainly was. With the October 2005 introduction of the 2.5 GHz Power Mac G5 Quad, Apple had introduced the most powerful PowerPC Mac ever.